คุณยังไม่มีสินค้าในรถเข็น

Close
Close

คุณยังไม่มีสินค้าในรถเข็น

ลำโพง Audioengine HD3 Active Speaker ลำโพง Audioengine HD3 Active Speaker ลำโพง Audioengine HD3 Active Speaker
Cherry
ลำโพง Audioengine HD3 Active Speaker Cherry ลำโพง Audioengine HD3 Active Speaker ลำโพง Audioengine HD3 Active Speaker ลำโพง Audioengine HD3 Active Speaker Black Satin ลำโพง Audioengine HD3 Active Speaker Walnut ลำโพง Audioengine HD3 Active Speaker ลำโพง Audioengine HD3 Active Speaker

ลำโพง Audioengine HD3 Active Speaker

รหัสสินค้า: HD3

Built-in power amplifiers
High-fidelity Bluetooth® with aptX®, extended range and simplified setup
USB audio input
Dual analog audio inputs and a full-range variable output
Custom Kevlar woofers and silk tweeters
Hand-built cabinets with furniture-grade finishes
Detachable magnetic speaker grills
Threaded brass inserts to secure speakers to floorstands

สถานะของสินค้า : สินค้าหมด

16,900 บาท

 

The ultimate mini music system
Our HD Series was designed for the way people listen to music today— streaming wirelessly, digital downloads, vinyl, etc. HD3 sets a new standard for compact mini music systems because of its versatility and ability to play all of your music from any device.

 

No missed connections
Connect to HD3 any way you like: wirelessly or wired, digital or analog. Stream your music library, TIDAL, Spotify, Pandora, YouTube, etc. to HD3 from just about anywhere in your house without dropouts. Wireless setup is a breeze and only takes about a minute. And if you’re using HD3 on your desktop, connect up with a USB cable. The USB input bypasses your computer’s built-in low-quality headphone jack for a high-end listening experience. But if you’re not keen on USB or wireless you can still use any audio cable to connect.

Your go-to system
Easy setup, simple and useful features, and wide stereo sound make HD3 your go-to music system. HD3 is expandable, so if you want deeper bass just connect up your subwoofer. No matter how you listen to music, HD3 has you covered.

Plug in your headphones
HD3 includes a dedicated high-performance headphone output so you can listen and not wake the neighbors. Its audiophile-quality headphone amplifier delivers high-end sound that drives even the most-demanding headphones.

Retro-forward design
HD3 was designed for audio performance, but speakers obviously also need to look good so we’ve included furniture-grade wood veneers, aluminum trim accents, and detachable magnetic grills that blend with any decor. Available in Satin Black as well as real Walnut and Cherry wood at no additional cost if you want to really show them off.

Small speakers that pack a punch
Built-in power amplifiers save space and eliminate the need to connect HD3 to a stereo receiver or external power amp. Simply plug the left speaker into a power outlet and connect the included speaker wire from the left to the right speaker. All internal components of the HD3 are designed and tuned together, so you’ll get Audioengine’s Signature Sound and a much more efficient system than traditional separate speakers and amplifier.

General specifications
Type 2.0 powered multimedia speaker system
Amplifier type Dual analog class A/B monolithic
Power output 60W peak power total (15W RMS / 30W peak per channel), AES
Drivers 2.75″ Kevlar woofers, 3/4” silk dome tweeters
Inputs 3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth
Outputs RCA variable line-out, 3.5mm mini-jack headphone out
Mains voltages 110-240V 50/60Hz auto-switching
SNR 95dB (typical A-weighted)
THD+N <0.05% at all power settings
Crosstalk <50dB
Frequency response 65Hz-22kHz ±2.0dB
Freq. response w/bass reduction switch selected 100Hz-22kHz ±2.0dB (-5dB down)
Input impedance 5K ohms unbalanced

Headphone amp specifications
Headphone amp type OPA2134
Full-scale headphone output level 2.0V RMS
Output impedance 2 ohms
Recommended headphone impedance range 10 ohms to 10K ohms

Bluetooth specifications
Internal D/A converter PCM 5102
Input bit depth 24-bits, upsampled
Bluetooth receiver type Bluetooth 4.0 audio
Supported codecs aptX, AAC, SBC
Wireless operation range Up to 100ft (30m) typical
Input data rate Determined by Bluetooth
Wireless latency ~30 milliseconds (ms)

USB specifications
Connector type Micro-USB
USB device class USB 1.1 or above
Internal D/A converter PCM 5102
Input bit depth 24-bits, upsampled
Input data rate 44.1KHz/48KHz
Protection Output current limiting, thermal over-temperature, power on/off transient protection
Dimensions (each) 7”(H) x 4.25”(W) x 5.5”(D)
Weight (LEFT speaker) 1.8Kg/4lbs
Weight (RIGHT speaker) 1.5Kg/3.4lbs
Shipping weight 4.5kg/10lbs per pair
Shipping box dimensions 11.6 (29.5cm)H x 11.75 (30cm)L x 8.8(22.5cm)W
Materials and construction
18mm thick MDF cabinets with real wood veneer
3/4″ (20mm) silk dome tweeters with neodymium magnets
2.75″ Kevlar woofers with advanced voice coils

What’s in the box
HD3 powered (left) speaker
HD3 passive (right) speaker
Antenna
Speaker wire (16AWG), 2 meters (~6.5 feet)
Power supply
AC power cable
Mini-jack audio cable, 1.5 meters (~5 feet)
USB cable, 1.5 meters (~5 feet)
Microfiber speaker bags
Microfiber cable bag
Microfiber power supply bag
Quickstart guide
Product line brochure  

 

แบรนด์ Audioengine

เขียนรีวิวสินค้าของคุณเอง

คุณกำลังรีวิว: ลำโพง Audioengine HD3 Active Speaker

คุณจะให้คะแนนสินค้านี้อย่างไร? *

  1 2 3 4 5
ราคา
ปริมาณ
คุณภาพ

คุณอาจจะสนใจในสินค้าดังต่อไปนี้

expand_less